| Item | Name | Picture |
|---|
| RC-85 |
RC-85 Wireless transmitter – car accessory Allows sending signal to EYE-02 from the car. Usually connected to “light siren”. |
 |
| JA-80P |
JA-80P Wireless PIR motion detector Connecting of additional PIR sensors allows extending of the monitored area for spaces that do not need to be monitored visually. |
 |
| JA-80PB |
JA-80PB Wireless PIR motion/glass-break detector The detector combines PIR motion detector and dual glass-break detector. This combination makes it suitable for areas accessible through windows. |
 |
| JA-89P |
JA-89P Wireless outdoor PIR detector The detector was designed especially for outdoor using. Contains double zone PIR and two tamper sensors for signaling that the detector’s cover has been opened or that the detector has been torn off its position. Ingress protection - IP54. |
 |
| JA-80M |
JA-80M Wireless magnetic door detector JA-80M contains a magnetic sensor which activates it when a door or a window is opened. |
 |
| JA-81M |
JA-81M Wireless magnetic door detector & universal transmitter JA-81M contains a magnetic sensor which activates it when a door or a window is opened. It can be extended by a normally closed / normally opened sensor connected to its wire input. |
 |
| CT-01 |
CT-01 Shutter-movement detector CT-01 is a wired detector for detecting an unauthorized movement of external window shutters on houses or buildings. It can be connected to the wire input of JA-81M detector. |
 |
| JA-82M |
JA-82M Wireless magnetic window detector JA-82M is an "invisible" magnetic sensor which can be easily installed on the majority of window frames. It is powered by 2 lithium cell button batteries model CR2354. |
 |
| JA-80S |
JA-80S Wireless fire detector JA-80S was designed to detect a presence of fire inside a building. It reacts to visible smoke or on exceeding a critical temperature in the room. It is battery-powered and contains a built-in local warning siren. |
 |
| JA-80G |
JA-80G Wireless gas leak detector JA-80G is activated by combustive gases or fume leakages. It uses a hot platinum filament sensor. This detector is mains-powered (230V AC) and besides wireless signaling to EYE-02, it also provides a relay output to shut down an electric gas inlet valve, if installed. |
 |
| JA-85P |
JA-85P Mini-size wireless motion detector JA-85P is a mini-size PIR sensor suitable for protecting small rooms. It uses a digital signal processing to avoid false alarms. |
 |
| JA-85B |
JA-85B Mini-size wireless glass-break detector JA-85B detects breaking of a window at the distance of up to 9 meters. It uses digital signal processing to avoid false alarms. |
 |
| JA-80L |
JA-80L Wireless internal siren JA-80L is a mains-powered (230V AC) siren which sounds an alarm. If disconnected from the power while it sounds an alarm, it reports tampering to the system (i.e. intruder verification). |
 |
| JA-80A |
JA-80A Wireless outdoor siren JA-80A is a completely wire-free siren in a solid housing. It also serves as an external tamper detector. Its lithium battery lasts up to 5 years depending on the mode. |
 |
| JA-80D |
JA-80D Universal transmitter JA-80D was designed to indicate device status via wireless transmissions. Such a device is typically a detector, but other devices with an ON/OFF switching output terminal – both NC or NO - are also applicable. Among other uses, status transmission allows to report device faults. JA-80D is battery-powered. |
 |
| TP-82 |
TP-82 Wireless thermostat TP-82 is a battery – powered thermostat that can be used to set and measure the temperature in a room. Temperature adjustment is performed by turning the setting knob, which can be locked to avoid accidental settings. In connection with EYE-02 allows switching the heating ON/OFF remotely by mobile phone, remote control or Internet. It contains antifreeze protection and on the occurrence of fire - when the temperature is above +60°C. |
 |
| TP-83 |
TP-83 Programmable wireless indoor thermostat TP-83 is a wireless indoor thermostat with a programmable weekly heating schedule. It is capable of recognizing warm-up persistence characteristics (within 2 days) and will adjust the settings accordingly so that a high level of operational comfort is achieved. Other features are similar to TP-82. |
 |
| RC-80 |
RC-80 4-button wireless remote controller The same remote controller is delivered with the camera. Additional controllers allow operating by more people independently. |
 |
| AC-82 |
AC-82 Wireless relay output module – AC powered AC-82 provides two remotely controllable relay outputs for a wide range of appliances like turning on/off lighting, heating, watering, etc. AC-82 is powered directly from the mains (230V AC). |
 |
| UC-82 |
UC-82 Wireless relay output module – DC powered UC-82 provides two remotely controllable relay outputs for a wide range of appliances like turning on/off lighting, heating, watering, etc. The UC-82 is powered by 12V DC. |
 |
| RC-89 |
RC-89 Wireless doorbell button Pushing of the button generates an alarm even though EYE-02 has not been activated. |
 |
| RC-88 |
RC-88 Wireless wall button Pushing of the button generates an alarm. |
 |
| RC-87 |
RC-87 Panic button Pushing of the red button on the controller generates an alarm. Suitable for remote monitoring of disabled people. |
 |